 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Philips Semiconductors Linear Products Product specification Quad high-performance operational amplifier NE/SE5514 DESCRIPTION The NE/SE5514 family of quad operational amplifiers sets new standards in bipolar quad amplifier performance. The amplifiers feature low input bias current and low offset voltages. Pinout is identical to LM324/LM348 which facilitates direct product substitution for improved system performance in dual supply applications. Output characteristics are similar to a A741 with improved slew and drive capability. PIN CONFIGURATIONS N Packages OUTPUT 1 -INPUT 1 +INPUT 1 V+ +INPUT 2 1 2 3 4 5 6 7 3 4 1 2 14 13 12 11 10 9 8 OUTPUT 1 -INPUT 1 +INPUT 1 V- +INPUT 2 -INPUT 2 OUTPUT 2 FEATURES -INPUT 2 OUTPUT 2 * Low input bias current: < 3nA * Low input offset current: < 3nA * Low input offset voltage:<1mV * Low supply current: 1.5mA/A * 1V/s slew rate * High input impedance: 100M * High common-mode impedance: 10G * Internal compensation for unity gain * 600 drive capability (7VRMS) APPLICATIONS D Package1 OUTPUT 1 -INPUT 1 +INPUT 1 V+ NC +INPUT 2 -INPUT 2 OUTPUT 2 1 2 3 4 5 6 7 8 3 4 1 2 16 OUTPUT 1 15 -INPUT 1 14 +INPUT 1 13 V- 12 NC 11 +INPUT 2 10 -INPUT 2 9 OUTPUT 2 * AC amplifiers * RC active filters * Transducer amplifiers * DC gain block * Instrumentation amplifier ORDERING INFORMATION DESCRIPTION 16-Pin Plastic Small Outline Large (SOL) package 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Plastic Dual In-Line Package (DIP) NOTE: 1. SOL - Released in 16-lead large SO package only. Pinout is different than N package. TEMPERATURE RANGE 0 to +70C 0 to +70C -55 to +125C ORDER CODE NE5514D NE5514N SE5514N DWG # 0171B 0405B 0405B August 31, 1994 82 853-1175 13721 Philips Semiconductors Linear Products Product specification Quad high-performance operational amplifier NE/SE5514 EQUIVALENT SCHEMATIC (ONE OP AMP) V+ -VIN +VIN OUTPUT -V ABSOLUTE MAXIMUM RATINGS SYMBOL VCC VDIFF VIN TSTG TSOLD TA Supply voltage Differential input voltage Input voltage Output short to ground Storage temperature range Lead soldering temperature (10sec max) Operating ambient temperature range NE5514 SE5514 PMAX Maximum power dissipation TA=25C (still-air)1 N package D package NOTES: 1. The following derating factors should be applied above 25C N package at 11.4mW/C D package at 10.0mW/C 1420 1250 mW mW 0 to 70 -55 to +125 C C PARAMETER RATING 16 32 0 to 32 Continuous -65 to +150 300 C C UNIT V V V August 31, 1994 83 Philips Semiconductors Linear Products Product specification Quad high-performance operational amplifier NE/SE5514 ELECTRICAL CHARACTERISTICS VCC = 15V, TA = 25C unless otherwise specified. SYMBOL VOS VOS IOS IOS IBIAS IBIAS RIN VCM Input resistance differential Input common mode range Input bias current Input offset current PARAMETER Input offset voltage TEST CONDITIONS RS=100, TA=+25C Over temp. Over temp. RS=100k, TA=+25C Over temp. Over temp. RS=100k, TA=+25C Over temp. Over temp. TA=25C TA=25C Over temp. VCC=15V, CMRR Input common-mode rejection ratio VIN=13.5V @ TA=25C VIN=13V @ Over temp. AV SR GBW M VOUT Large-signal voltage gain Slew rate Small-signal unity gain bandwidth Phase margin Output voltage swing RL=2k, TA=25C VO = 10V, Over temp. TA=25C TA=25C TA=25C RL=2k, TA=25C Over temp. RL=6001, TA=25C Over temp. RL=Open, TA=25C Over temp. 5V VCC 15V Over temp. f=1kHz to 20kHz, TA=25C f=10kHz, TA=25C VO=7VRMS f=1kHz, TA=25C TA=25C 10 80 13 12.5 10 7.5 50 25 0.6 200 1 3 45 13.5 13 11.5 9 6 7 110 -120 0.01 30 40 60 10 10 12 80 13 12.5 10 8 50 25 0.6 200 1 3 45 13.5 13 11.5 9 6 7 110 -120 0.01 30 40 60 10 12 V/mV V/s MHz Deg V 70 100 70 100 dB 13.5 13 SE5514 Min Typ 0.7 1 4 3 4 30 3 4 30 100 13.7 13.2 13.5 13 10 20 10 20 Max 2 3 Min NE5514 Typ 1 1.5 5 6 8 40 6 8 40 100 13.7 13.2 20 30 20 30 Max 5 6 UNIT mV V/C nA pA/C nA pA/C M V VOUT ICC PSRR AA THD VNOISE ISC Output voltage swing Power supply current Power supply rejection ratio Amplifier to amplifier coupling Total harmonic distortion Input noise voltage Short-circuit current V mA dB dB % nV/Hz mA NOTES: 1. Not to exceed maximum power dissipation. August 31, 1994 84 |
Price & Availability of NE5514
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |